- Details
- Mehr Bilder
- Downloads
- Rezensionen
Produktbeschreibung
This updated version of the Black Horse stuka features an improved gear design and large top hatch making it easier to assemble.
The Black Horse Stuka is a near to scale replica of the Ju-87B-2 variant, representing an aircraft operated in Austria in 1943. Some compromises have been made to model construction/flying but the general outline is fairly close to scale, as is the colour scheme.
Designed primarily for a 1.20 size four stroke engine, the Stuka can also be converted to EP power if required and a hatch on the underside allows acces to change the battery.
Those characteristic ailerons and flaps work just like the real thing and are surprisingly effective. The highly tapered wing requires care when landing but once down, the sprung undercarriage absorbs the bumps on the average flying field very well.
Each wing, complete with undercarriage leg, can be removed for transport. Although the bomb is fixed, a little inginuity will allow a dropping mechanism to be conjured up, by those that feel it is essentail.
The canopy has been left un-glued, so that scale fanatics can dress up the cockpit and pilots to their hearts content!
• Scale Outline
• All Balsa & Ply Construction
• Pre-printed accurate colour scheme
• Scale Flaps
• Suitable for IC or Electric Power
This new version includes minor updates in improvements in construction.
Requires:
1 x 6-Ch. Radio: Futaba 6EX or 7C
9 x Servos: Futaba S3003 or Towerpro MG 995H or Towerpro SG 5010R
1 x 91 2-Stroke or 120 4-Stroke Engine: 2-Takt PH-91S or 4-Takt PH-FS120 AR
1 x Propeller
2 x Servo Y-Cable
Brushless Motor: Boost 90 (Motor + 70A Regler + Programmierkarte)
Li-Po Akku: 2 x Evo Blue 4S 14.8V 4000mAh
Prop: APC 16x12
The Black Horse Stuka is a near to scale replica of the Ju-87B-2 variant, representing an aircraft operated in Austria in 1943. Some compromises have been made to model construction/flying but the general outline is fairly close to scale, as is the colour scheme.
Designed primarily for a 1.20 size four stroke engine, the Stuka can also be converted to EP power if required and a hatch on the underside allows acces to change the battery.
Those characteristic ailerons and flaps work just like the real thing and are surprisingly effective. The highly tapered wing requires care when landing but once down, the sprung undercarriage absorbs the bumps on the average flying field very well.
Each wing, complete with undercarriage leg, can be removed for transport. Although the bomb is fixed, a little inginuity will allow a dropping mechanism to be conjured up, by those that feel it is essentail.
The canopy has been left un-glued, so that scale fanatics can dress up the cockpit and pilots to their hearts content!
• Scale Outline
• All Balsa & Ply Construction
• Pre-printed accurate colour scheme
• Scale Flaps
• Suitable for IC or Electric Power
This new version includes minor updates in improvements in construction.
| Spezifikation | |||||
|
| ||||
|
| ||||
|
| ||||
|
| ||||
| | ||||
Requires:
1 x 6-Ch. Radio: Futaba 6EX or 7C
9 x Servos: Futaba S3003 or Towerpro MG 995H or Towerpro SG 5010R
1 x 91 2-Stroke or 120 4-Stroke Engine: 2-Takt PH-91S or 4-Takt PH-FS120 AR
1 x Propeller
2 x Servo Y-Cable
Brushless Motor: Boost 90 (Motor + 70A Regler + Programmierkarte)
Li-Po Akku: 2 x Evo Blue 4S 14.8V 4000mAh
Prop: APC 16x12
Datei
Blackhorse Stuka 1920mm Manual EN6.18 MB
Kundenrezensionen:
Schreiben Sie die erste Kundenrezension!
Übersicht | Artikel 14 von 53 in dieser Kategorie« Erster | « vorheriger | nächster » | Letzter »
Zahlungsmethoden
Versandarten
SSL Verschlüsselung
Shop Zertifikat
Newsletter-Anmeldung
E-Mail-Adresse:
Der Newsletter kann jederzeit hier oder in Ihrem Kundenkonto abbestellt werden.
Customer Support
Mo. - Fr. 14.00 - 19.00 Uhr
Bay-Tec Modelltechnik © 2024 | Template © 2009-2024 by modified eCommerce Shopsoftware